FUGRO MARINESTAR GNSS
SUPPORT PORTAL
Log In Log In

How do I check the serial number on my receiver?

Seastar 3510LR

  • From the home menu (Press UP and DOWN simultaneously to reach the HOME menu)
  • Press the RIGHT arrow key, the 'About' menu will appear
  • Press the DOWN arrow key and the serial number will appear in the SN menu.

Seastar 3610

  • From the home menu (Press ESC numerous times to reach the HOME menu)
  • Press the DOWN arrow key, the 'About' menu will appear
  • Press the RIGHT arrow or ENTER key and the serial number will appear in the SN menu.

Fugro 9200/9205

  • From the home menu (Press ESC numerous times to reach the HOME menu)
  • Press the DOWN arrow key times until the Trimble serial number appears in the serial number menu. Press the RIGHT arrow to see the Demodulator Serial Number

DPS110/112

  • From the home menu (Press ESC numerous times to reach the HOME menu)
  • Press the RIGHT key 3 times until you reach 'About, demodulator'
  • Press the DOWN key 3 times until you see the serial number in the serial number menu

For further information contact Seastar Service on +47 21 50 14 20 (24 hr duty phone) or click here to email.


NOT logged-in or logged-in but may not see session variables