The Fugro 9200-G2 is a combined position and correction receiver that is not limited to using the GPS constellation. GLONASS operation may be enabled by a (chargeable) software unlock, significantly increasing the number of satellites available for a position solution. The 9200-G2 is out of production, but still supported; alternatively the 9205-GNSS is recommended as a direct replacement which can use all available GNSS constellations.
- Downloadables
- FAQs
9200-G2 User Manual Issue 1.6 (Seastar)
(ID: 12320700, ver. A2, modified: 2018-03-19 15:53:04)
9200-G2 Internal System Software (Firmware) Update Package (to v4.88)
(ID: 31000901, ver. A9, modified: 2020-02-14 10:43:14)- Change Correction Source Fugro 9200-G2
(ID: 31153002, ver. C1, modified: 2020-03-09 15:58:46) - Installing the GLONASS option (on Fugro 920x GNSS receivers)
(ID: 31002700, ver. A2, modified: 2018-03-19 15:53:04)
- FAQs for 9200-G2
- How can I get my receiver activated? (# 23)
- I have no lock, or bad/intermittent signal, what can I do? (# 26)
- NTRIP (# 27)
- Do I have an active subscription (Fugro 9200-G2, 9205-GNSS)? (# 28)
- How do I enter the web interface of the Fugro 9200-G2 or 9205-GNSS? (# 30)
- How do I find out if my 920x receiver has the latest firmware? (# 31)
- Is my demodulator Inmarsat or spotbeam? (# 34)
- The warranty code on my 920x unit is expired, what do I do? (# 35)
- How do I check the serial number on my Fugro 9200/9205 receiver? (# 63)
- Other Models
- Kongsberg DPS 110 / DPS 112
- 9205-GNSS
- 3710
- 3610
- 3510 LR
- 8200 HP
- 3000 L / 3100 LR